Quick answer: Gutters cost $6 to $14 per linear foot for seamless aluminum, the most common choice, so a typical 150 ft home runs about $900 to $2,100 installed. Vinyl is $3 to $5 per foot and copper $15 to $45. Height, guards and removal add to the total.
How the gutter cost estimate works
total = length × rate per ft + add-onsRate depends on material; guards and extra downspouts go on top- Measure your roofline. Add every roof edge that needs a gutter; most homes have 100 to 200 ft.
- Pick a material. Seamless aluminum is the default.
- Multiply length by the rate for a low-to-high range.
- Add extras: height, removal, guards and downspouts beyond the usual four.
Gutter installation cost by length (aluminum)
| Roofline | Home size | Low ($6/ft) | High ($14/ft) | Typical |
|---|---|---|---|---|
| 100 lf | ~1,000 sq ft | $600 | $1,400 | $1,000 |
| 120 lf | ~1,200 sq ft | $720 | $1,680 | $1,200 |
| 150 lf | ~1,500 sq ft | $900 | $2,100 | $1,500 |
| 180 lf | ~2,000 sq ft | $1,080 | $2,520 | $1,800 |
| 200 lf | ~2,200 sq ft | $1,200 | $2,800 | $2,000 |
| 220 lf | ~2,500 sq ft | $1,320 | $3,080 | $2,200 |
Gutter cost per linear foot by material
| Material | Installed / ft | Lifespan | Best for |
|---|---|---|---|
| Vinyl | $3 – $5 | 15 – 20 yrs | Budget, mild climates |
| Seamless aluminum | $6 – $14 | 20 – 30 yrs | Most homes |
| Galvanized steel | $8 – $20 | 20 – 30 yrs | Heavy weather |
| Copper | $15 – $45 | 50 – 100 yrs | High-end curb appeal |
| Zinc | $35 – $45 | 50+ yrs | Premium modern look |
Seamless aluminum, formed on site to your roofline, leaks far less than sectional gutters for only a little more per foot.
Worked example
150 ft single-story home, seamless aluminum, 4 downspouts, old gutters removed
- Base: 150 × $6 to $14 = $900 to $2,100
- Removal: 150 × $2 = $300
- Downspouts: covered by per-foot pricing
Result: $1,200 to $2,400 (midpoint about $1,800)
Add guards and the range rises by $700 to $1,700. In copper, the base alone for the same 150 ft is $2,250 to $6,750.
What affects gutter installation cost
- Material: a 10× spread from vinyl to copper.
- Roofline length and corners: complex rooflines cost more.
- Stories: $1 to $3 more per foot for height.
- Downspouts and guards: guards alone often add $700 to $1,700.
- Removal: $1 to $3 per foot, plus fascia or soffit repairs.
- Region and roof pitch: urban labor and steep roofs push prices up.
How to save on gutter installation
- Stick with seamless aluminum unless you want copper’s look or lifespan.
- Get three itemized quotes.
- Book late fall or winter when installers are quieter.
- Bundle with a roof replacement.
- Guard only where trees drop debris.
Frequently asked questions
How much does gutter installation cost?
$6 to $14 per linear foot for seamless aluminum. A typical 150 ft home runs about $900 to $2,100 installed. Vinyl is cheaper; copper costs far more.
How much do gutters cost on a 2,000 sq ft house?
About 180 linear feet, so roughly $1,080 to $2,520 in aluminum, single story, before guards or removal.
What is the cost of gutters per linear foot?
Vinyl $3 to $5, seamless aluminum $6 to $14, galvanized steel $8 to $20, copper $15 to $45 and zinc $35 to $45 installed.
Does a two-story house cost more for gutters?
Yes, about $1 to $3 more per linear foot for height, staging and safety equipment.
How much do gutter guards add?
Typically $700 to $1,700 for a whole home. Add them only where trees drop debris.
Is it cheaper to install gutters yourself?
DIY sectional gutters can save $3 to $8 per foot in labor, but seamless gutters need on-site forming machines and are best left to pros.
Related tools
Accuracy note: Rates are checked against Angi’s 2026 gutter cost data, This Old House and HomeGuide. This is a planning estimate, not a quote.
Content Lead, Anchor AI Tools, California, USA. Spotted an error? Email hello@anchoraitools.com and it will be checked and corrected. See our editorial standards.